葡京集团app「诚|信」

    <ruby id="tt51r"></ruby>

    <pre id="tt51r"><ruby id="tt51r"><mark id="tt51r"></mark></ruby></pre>
    <pre id="tt51r"><ruby id="tt51r"><mark id="tt51r"></mark></ruby></pre>

      <address id="tt51r"><strike id="tt51r"></strike></address>

              <del id="tt51r"></del> <ruby id="tt51r"></ruby>

                CuZn40Ni10

                INTRODUCTION 

                CuZn40Ni10 provides higher mechanical properties making this suitable for build-up and overlay applications such as gear teeth, bearings, and valve seats. The silicon addition helps prevent fuming (Zinc vaporization). The weld deposits have a very high tensile strength, good ductility and excellent corrosion resistance. These are used to braze weld steel and cast iron. The deposit provides a good color match to these metals.

                CHEMICAL COMPOSITION

                AWS Code

                Alloy

                Cu%

                Si%

                Ni%

                Zn%

                Cu 7730

                CuZn40Ni10 49

                0.15

                10

                Rest

                Typical Physical Properties

                Solids Temperature
                Density
                ElongationLiquids TemperatureTensile StrengthBrinell Hardness
                890°C 8.4kg/dm3 25% 935°C 385N/mm2 120HB

                Advantage:

                Resonable price, in stock for regular sizes, short lead time

                International production technology, quality guaranteed

                100% replacement / refund (delivery included) for problematic items

                Spray process

                Arc Spray

                Arc spraying is the use of electric arc burning in two consecutive fed between the wires to melt the metal, with a high velocity gas stream molten metal atomization, and the atomization of the sprayed metal particles so that they accelerate the work to form a coating technology .

                Flame Spray

                The use of a flame as the heat source, the metal and non-heated to a molten state, forming a mist flow in the state of high-speed air jet to the substrate, the injection of the molten minute particles impact upon the substrate above, plastic deformation, into a sheet shape superimposed sedimentary layers.

                Application

                Gear teeth, bearings, and valve seats

                Packing and shipping

                STANDARD SIZE&PACKING

                Diameter

                Dimension Tolerance

                Packing

                Wire Weight

                1/16"(1.6mm)

                +0/-0.05

                D 300 Spool

                15kgs(33 lbs)/spool

                2.0mm

                +0/-0.05

                D 300 Spool

                15kgs(33 lbs)/spool

                1/8"(3.17mm)

                +0/-0.05

                Coil Form

                20-400kgs/coil

                Other sizes can be produced based on customers’ requirement.

                Label

                Brand, Neutral or Customized

                Delivery

                Courier/Air/Sea

                Normally we keep stock of 1.6mm, can deliver in 1-3 days.

                For mass order, delivery time is depends on the quantity.

                Leave message

                Please Feel free to give your inquiry in the form below.We will reply you in 24 hours.

                • *
                葡京集团app